Stay flap fitting, Häfele Free flap H 1.5, all-plastic, 2-piece set

For one-piece flaps made from wood, glass or with aluminium frame

  • Free fl ap

    For flaps made from wood, glass or with aluminium frame

    • Hinge-less stay lap ittings sets standards: Two models Free lap 1.7 and 3.15, designed for all common cabinet height and lap weight combinations
    • Convenient handling, even with heavy laps
    • Stylish and compact design provides easy access to cabinet hangers and is suitable for use in furniture with narrow depth
    • Easy, eficient and time-saving processing
    • Suitable for front panels with or without handle (in combination with special door catch)

    Maximum operating convenience

    Maximum flexibility

    • Compact design
    • Drilling pattern compatibility of the two models (processing in series drilled holes 32/37)
    • Stylish cover caps
    • grey and white

    ⓐ Free flap 1.7

    ⓑ Free flap 3.15

    • max. front panel weight 27,3 kg (with 350 mm cabinet height)
    • Front panel thickness up to 28 mm (without collision at 90° opening angle)
    • Opening angle 107° (can be limited to 90°)
    • Minimum opening resistance
    • Flap locks in any position (multi-position stop)
    • Smooth and soft closing action

    Quick installation

    Extremely convenient adjustment

    Plug it itting onto pre-drilled side panel, tighten Euro screws that were pre-mounted in the factory, done.

    Position front, clip in, done.

    Holding power (1) and gap pattern (2)–(4) can be conveniently adjusted from the front, adjustment of required opening angle via adjusting slider (model 3.15), done.

  • Free flap H 1.5 – Standard mounting version for power assisted opening of flap

    Note

    • The following mounting dimensions and sample measurements tables for this kind of application must be adhered to
    • Use two Free flap H 1.5 fittings from cabinet width of 600 mm and above
    • The weight specifications in the sample measurements table apply to one Free flap H 1.5 fitting, the flap weight values double when using two fittings
    • For use in combination with standard concealed hinges 110° with or without integrated soft closing mechanism
     
     
     
     

    Opening angle 75°

    Cabinet height

    mm

    Flap weight kg

    Model A

    Model B

    Model D

    350

    2.6–4.2

    3.8–6.5

    6.2–10.9

    400

    2.3–3.3

    3.0–5.8

    5.6–10.2

    450

    2.2–3.1

    2.7–4.6

    5.5–9.7

    500

    1.7–2.8

    2.3–4.6

    4.6–8.5

    550

    1.6–2.6

    2.2–4.2

    4.1–6.6

    600

    1.2–2.3

    2.1–3.9

    3.9–6.0

     
     
     
     
     
     

    Opening angle 90°

    Cabinet height

    mm

    Flap weight kg

    Model A

    Model B

    Model D

    275

    2.8–3.8

    3.5–6.0

    5.8–10.5

    300

    2.2–3.4

    3.3–5.7

    5.2–9.0

    350

    2.1–2.9

    2.7–4.9

    4.8–8.0

    400

    1.6–2.3

    2.3–4.6

    4.3–7.9

    450

    1.3–2.2

    2.0–3.8

    3.8–6.3

    500

    1.2–2.0

    1.7–3.4

    3.4–6.0

    550

    1.2–1.9

    1.7–3.0

    3.0–5.1

    600

    0.9–1.6

    1.6–3.0

    3.0–4.7

     
     
     
     
     

    Opening angle 110°

     
     

    F1 ≥ 2 mm

    Cabinet height

    mm

    Flap weight kg

    Model A

    Model B

    Model D

    275

    1.9–2.8

    2.6–4.3

    4.2–7.1

    300

    1.1–2.4

    2.4–4.1

    4.0–7.0

    350

    1.1–2.1

    2.1–3.7

    3.6–6.4

    400

    1.1–1.7

    1.7–3.2

    3.2–5.5

    450

    1.0–1.6

    1.6–2.8

    2.8–5.5

    500

    1.0–1.4

    1.3–2.5

    2.5–4.5

    550

    0.8–1.3

    1.3–2.2

    2.2–3.9

    600

    0.7–1.2

    1.2–2.2

    2.2–4.3

  • Free flap H 1.5 – Touch Opening mounting version for opening the flap slightly, with multi-position stop

    Note

    • The following mounting dimensions and sample measurements tables for this kind of application must be adhered to
    • Use two Free flap H 1.5 fittings from cabinet width of 600 mm and above
    • The weight specifications in the sample measurements table apply to one Free flap H 1.5 fitting, the flap weight values double when using two fittings
    • For use in combination with Duomatic Push hinges and magnetic door catches
    • Use one Push magnetic door catch 356.06.460/461 and one additional magnet 356.06.470/471 (at some distance) for holding the flap reliably in closed position
     
     
     
     

    Opening angle 75°

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    350

    4.6–5.3

    400

    3.2–4.8

    4.3–7.0*

    5.5–8.0*

    450

    2.5–4.0

    4.0–6.3*

    5.0–7.6*

    500

    2.2–3.5

    3.5–5.4*

    4.7–7.3*

    550

    2.0–3.3

    2.6–5.1

    4.0–6.9

    600

    2.6–4.7

    3.6–6.3

    * 356.06.460/461 + 356.06.470/471

     
     
     
     
     
     

    Opening angle 90°

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    350

    2.4–4.2

    3.4–5.2*

    4.7–6.9*

    400

    1.5–3.2

    3.1–4.9*

    3.9–5.6*

    450

    1.5–2.6

    2.6–4.2*

    3.6–5.4*

    500

    1.4–2.4

    2.4–3.6

    3.4–5.0

    550

    1.3–2.1

    1.9–3.2

    2.6–4.6

    600

    1.3–1.9

    1.8–3.1

    * 356.06.460/461 + 356.06.470/471

     
     
     
     
     

    Opening angle 110°

     
     

    F1 ≥ 2 mm

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    300

    2.0–3.6

    2.8–5.3

    350

    2.0–3.4

    2.7–4.6

    3.6–5.6

    400

    1.8–2.9

    2.6–3.9

    3.5–5.0

    450

    1.4–2.2

    2.2–3.7

    2.9–4.4

    500

    1.3–2.2

    2.0–3.4

    2.6–3.7

    550

    1.0–1.8

    1.6–3.2

    2.3–3.9

    600

    1.5–2.7

    2.2–3.4

  • Free flap H 1.5 – Push-to-open mounting version for automatic complete opening

    Note

    • The following mounting dimensions and sample measurements tables for this kind of application must be adhered to
    • Use two Free flap H 1.5 fittings from cabinet width of 600 mm and above
    • The weight specifications in the sample measurements table apply to one Free flap H 1.5 fitting, the flap weight values double when using two fittings
    • For use in combination with Duomatic Push hinges and magnetic door catches
    • Use one Push magnetic door catch 356.06.460/461 and one additional magnet 356.06.470/471 (at some distance) for holding the flap reliably in closed position
     
     
     
     

    Opening angle 75°

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    350

    2.6–3.6

    3.1–5.3*

    4.7–6.6*

    400

    2.3–3.1

    3.1–5.1*

    4.3–6.6*

    450

    1.8–2.6

    2.6–4.0*

    3.6–5.6*

    500

    1.6–2.3

    2.3–3.6

    3.3–4.9

    550

    1.5–2.1

    2.1–3.6

    3.1–4.6

    600

    1.4–2.0

    2.0–3.2

    2.7–4.2

    * 356.06.460/461 + 356.06.470/471

     
     
     
     
     
     

    Opening angle 90°

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    350

    1.7–2.5

    2.1–3.2

    3.0–4.0

    400

    1.3–1.9

    1.9–3.0

    2.8–4.0

    450

    1.1–1.5

    1.5–2.6

    2.2–3.2

    500

    1.4–2.4

    2.0–2.9

    550

    1.3–2.2

    1.8–2.8

    600

    1.3–1.7

    1.5–2.5

     
     
     
     
     

    Opening angle 110°

     
     

    F1 ≥ 2 mm

    Cabinet height

    mm

    Flap weight kg

    Model B

    Model C

    Model D

    300

    1.5–2.1

    2.1–3.0

    2.7–4.1

    350

    1.5–2.1

    1.9–2.7

    2.6–3.7

    400

    1.1–1.5

    1.5–2.5

    2.2–3.5

    450

    1.0–1.3

    1.3–2.3

    2.0–2.9

    500

    1.2–1.7

    1.6–2.7

    550

    1.2–1.7

    1.5–2.3

    600

    1.2–1.5

    1.3–2.1

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    NONE Min. 1
    See Required Products

    372.39.500 Free flap H 1.5 A SM grey

    For one-piece flaps made from wood, glass or with aluminium frame –, Model: A, mounting: Two-sided, colour: Grey

    372.39.510 Free flap H 1.5 B SM grey

    For one-piece flaps made from wood, glass or with aluminium frame –, Model: B, mounting: Two-sided, colour: Grey

    372.39.520 Free flap H 1.5 C SM grey

    For one-piece flaps made from wood, glass or with aluminium frame –, Model: C, mounting: Two-sided, colour: Grey

    372.39.530 Free flap H 1.5 D SM grey

    For one-piece flaps made from wood, glass or with aluminium frame –, Model: D, mounting: Two-sided, colour: Grey

    372.39.700 Free flap H 1.5 A SM white

    For one-piece flaps made from wood, glass or with aluminium frame –, Model: A, mounting: Two-sided, colour: White

    Product details

    Mounting

    On both sides

    Material

    Housing, support arm, mounting bracket, screw-on bracket and hex key: Plastic

    Finish/colour

    Grey or white

    Installation

    Lid stay: Without tools
    mounting bracket and screw-on bracket: For screw fixing

    Adjustment facility

    Holding power adjustment
    Product Features

    Supplied with

    2 lid stays

    2 mounting brackets for cabinet

    2 screw-on brackets for flap

    1 hex key, SW10, plastic

    1 set of installation instructions

    Order reference

    Use two Free flap H 1.5 fittings from cabinet width of 600 mm and above.

    Complementary products and accessories
    14-Oct-2019

    Stay flap fitting, Häfele Free flap H 1.5, all-plastic, 2-piece set

    For one-piece flaps made from wood, glass or with aluminium frame –

    • Left hand ⓛ or right hand ⓡ mounting

    Image may show a similar article, please check product details.

    Note

    Please select an article via the features or article table in order to add it to the basket.