Ball bearing runners, full extension, Accuride 3832, load-bearing capacity up to 45 kg, steel, side mounting

With hold-in device for holding in closed position –, installation length: 200 mm, galvanized

Art. no. 422.41.921

  • Information
  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.

     
     
     

    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.

     
     
     
     
     
     

    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.

     
     
     
     
     
     

    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws
     
     
     
     
     
     

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.

     
     
     
     
     

    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.

     
     
     
     
     
     

    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.

     
     
     

    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.

     
     
     

    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.

     
     

    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options

     
     
     

    On shelves

     

    Side mounted

    Base mounted I

    Base mounted II

    Suspended

     
     
     
     
     
     
     
     
     
     

    On drawers

     

    Groove mounted

    Side mounted

    Base mounted�

    Suspended

    Concealed

     
     
     
     
     
     
     
     
     
     

    On cabinets

     

    Side mounted

    Suspended

    Base panel mounting

    Filter

    Complete your selection

    With hold-in device for holding in closed position –, installation length: 150 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.315

    With hold-in device for holding in closed position –, installation length: 200 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.320

    With hold-in device for holding in closed position –, installation length: 250 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.325

    With hold-in device for holding in closed position –, installation length: 300 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.330

    With hold-in device for holding in closed position –, installation length: 550 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.335

    With hold-in device for holding in closed position –, installation length: 400 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.340

    With hold-in device for holding in closed position –, installation length: 450 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.345

    With hold-in device for holding in closed position –, installation length: 500 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.350

    With hold-in device for holding in closed position –, installation length: 550 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.355

    With hold-in device for holding in closed position –, installation length: 600 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.360

    With hold-in device for holding in closed position –, installation length: 650 mm, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.365

    With hold-in device for holding in closed position –, installation length: 700, galvanized black

    Art. no. 422.41.921

    Art. no. 422.41.370

    With hold-in device for holding in closed position –, installation length: 150 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.916

    With hold-in device for holding in closed position –, installation length: 200 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.921

    With hold-in device for holding in closed position –, installation length: 250 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.925

    With hold-in device for holding in closed position –, installation length: 300 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.930

    With hold-in device for holding in closed position –, installation length: 350 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.935

    With hold-in device for holding in closed position –, installation length: 400 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.940

    With hold-in device for holding in closed position –, installation length: 450 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.945

    With hold-in device for holding in closed position –, installation length: 500 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.950

    With hold-in device for holding in closed position –, installation length: 550 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.955

    With hold-in device for holding in closed position –, installation length: 600 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.960

    With hold-in device for holding in closed position –, installation length: 650 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.965

    With hold-in device for holding in closed position –, installation length: 700 mm, galvanized

    Art. no. 422.41.921

    Art. no. 422.41.970

    Your search for null returned no results.

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Pair Min. 1
    Article details
    Accuride 3832 with hold-in device for holding in closed position

    Material

    Steel

    Finish/colour

    Galvanized

    Version

    with hold-in device for holding in closed position

    Height adjustment

    ±1.6 mm for adjusting drawer front

    Temperature

    –20 to +80°C

    max. drawer width

    Internal cabinet width – 25.4 mm
    Show more information
    Product Features

    Order reference

    On request also available in black galvanized or white coated from an order quantity of 10 pairs.

    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    02-Jun-2020

    Ball bearing runners, full extension, Accuride 3832, load-bearing capacity up to 45 kg, steel, side mounting

    With hold-in device for holding in closed position – installation length: 700 mm, galvanized

    • Drilling pattern

    Image may show a similar article, please check product details.