Ball bearing runners, full extension, Accuride 3832, load-bearing capacity up to 45 kg, steel, side mounting

With hold-in device for holding in closed position

  • Information
  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.

     
     
     

    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.

     
     
     
     
     
     

    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.

     
     
     
     
     
     

    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws
     
     
     
     
     
     

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.

     
     
     
     
     

    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.

     
     
     
     
     
     

    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.

     
     
     

    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.

     
     
     

    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.

     
     

    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options

     
     
     

    On shelves

     

    Side mounted

    Base mounted I

    Base mounted II

    Suspended

     
     
     
     
     
     
     
     
     
     

    On drawers

     

    Groove mounted

    Side mounted

    Base mounted�

    Suspended

    Concealed

     
     
     
     
     
     
     
     
     
     

    On cabinets

     

    Side mounted

    Suspended

    Base panel mounting

  • Instructions available.
    Please select an article to view.
  • Technical documents available.
    Please select an article to view.

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

NONE Min. 1

422.41.315 Soft-Roll.45 KTS black 150mm

With hold-in device for holding in closed position –, installation length: 150 mm, galvanized black

422.41.320 Soft-Roll.45 KTS black 200mm

With hold-in device for holding in closed position –, installation length: 200 mm, galvanized black

422.41.325 Soft-Roller 45 KTS black 250mm

With hold-in device for holding in closed position –, installation length: 250 mm, galvanized black

422.41.330 Soft-Roller 45 KTS black 300mm

With hold-in device for holding in closed position –, installation length: 300 mm, galvanized black

422.41.335 Soft-Roller 45 KTS black 350mm

With hold-in device for holding in closed position –, installation length: 350 mm, galvanized black

Product details
Accuride 3832 with hold-in device for holding in closed position

Material

Steel

Finish/colour

Galvanized or black galvanized

Version

with hold-in device for holding in closed position

Height adjustment

±1.6 mm for adjusting drawer front

Temperature

–20 to +80°C

max. drawer width

Internal cabinet width – 25.4 mm
Show more information
Product Features

Order reference

On request also available in black galvanized or white coated from an order quantity of 10 pairs.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
01-Oct-2020

Ball bearing runners, full extension, Accuride 3832, load-bearing capacity up to 45 kg, steel, side mounting

With hold-in device for holding in closed position –

Image may show a similar article, please check product details.