Add a product to your basket by entering the article number:
Locking maps are useful for organising comprehensive master key systems. They make organisation much easier. Generally, a distinction is made between two systems: Simple organisation with a master key (abbreviated to MK) and multi-level organisation with a general master key (abbreviated to GMK).
Organisation with master key (MK locking systems)
MK systems have several individual keys (IK) that are keyed to differ, i.e. they are not interchangeable.
Then there is the master key (MK), which overrides all of the individual keys and therefore opens every lock in this system.
MK locking systems are ideal for small offices with a boss and several employees.
Organisation with general master key (GMK locking systems)
GMK systems have both individual keys (IK) and group keys (GK) that are assigned to different IK's. Several GK's can be assigned to one master group key (MGK).
The general master key (GMK) then overrides every key in the system.
GMK locking systems are used for organisation in large office buildings with several departments and sub-departments.
Closure direction and closure travel
Closure travel for cam locks 90°
Closure travel for cam locks 180°
Closure direction left
Closing direction right
The closure travel is specified by numbers and the closure direction is specified by letters with cam locks. They refer to the installation situations shown in the tables. Locks with closure travel 180° can be altered to all closure travels. Factory set is closure travel 1.
Locks with closure travel 90° are either left or right locking locks. The closure direction is here specified by letters. The first letter indicates the factory setting, the closure direction can be altered to the letters specified in brackets by re-positioning the locking cam (example: Closure direction A [D, F, G]).
For divided profile rods Ø 8 mm
The locks of the PZ 60 locking system have a PC aperture in order to accommodate single profile cylinders with dimensions in compliance with DIN 18252/1999. It is therefore easy to integrate them in locking systems based on profile cylinders.
Accessories – Backplates, roses and escutcheons
PZ 60 espagnolette lock
Ø 40 mm suitable for rim locks or espagnolette locks with 7 mm square spindle aperture
PZ escutcheon plate for glue fixing
PZ 60 espagnolette lock with latchbolt function
in compliance with DIN EN 1303
PZ escutcheon plate for screw fixing
PZ 60 rim lock
Cylinder rosette, round
PZ 60 latchbolt rim lock
Cylinder rosette, oval
Please consider the following dimensions when designing the cabinet and when choosing the accessories for the locking system:
Upper rod dimension = centre of lock case – 32 mm
(A = D – 32 mm)
Lower rod dimension = centre of lock case – 32 mm
(B = D – 32 mm)
1 Cam lock
1 Crown nut
1 Locking cam, straight
1 Hexagon socket SW 2.5
1 Spacer plate
1 Hole nut
1 Pipe nut
Image may show a similar article, please check product details.